The Raminator Monster Truck v3
The 1/5 scale Primal RC Raminator Monster Truck is a hulking monster of a machine. Weighing in at 80 pounds, it’s one of the biggest, most powerful RC vehicles you’ve ever seen!
$3,399 + ShippingOrder Now
*Shipping not included.
See the Monster Truck in Action
Tried and True Design
This is the version 3 of the Primal RC Monster Truck platform
- Solid Axle Ready-To-Run Monster Truck
- 2-Stroke Reed-Valve 49cc Gas Mini Motorcycle Engine
- 78mm Centrifugal Clutch
- Transmitter-Activated Reverse Function
- Four-Link Coil-Over-Shock Suspension Setup
- Weighs A Backbreaking 80 Pounds
- 32 inches wide, 40 inches long and 24 inches tall
- Largest in-production tires designed for RC
- Solid Axle
- Drive Shafts
- 49cc Engine
- Body & Roll Cage
CNC aluminum axle tubes with steel axle shafts. Heavy duty CNC aluminum-cased oil-filled 4 bevel gear differentials. Steel ring and pinon gears. Modular axle tube designed for easy maintenance. Ready for rear-wheel steering conversion kit.
Adjustable four-link coil-over-shock long-travel suspension. 12-Inch aluminum-bodied oil-filled heavy duty shocks. Front and rear sway bars. Solid aluminum four-link suspension shafts with steel heim joint ends.
Heavy duty 22mm-thick steel front and rear telescopic drive shafts.
Double chain-driven all-steel gear single-speed transmission. Multiple gear ratio options for high speed and torque adjustments. Transmitter-operated reverse. Designed for easy maintenance.
49cc Reed Valve Engine
49cc 2-stroke gas air-cooled pull start reed valve mini motorcycle engine. Rated for 6+ horsepower. Designed for high torque at lower RPM. 80mm centrifugal clutch setup. Custom-designed stainless steel tuned exhaust pipe.
Body and Roll Cage
Monster truck body. Two-Piece polycarbonate body mounted on a custom heavy duty plastic roll cage. Entire body and cage assembly easily removable for maintenance. Detailed interior driver figure.
Six-piece modular CNC aluminum frame. Frame designed to mount engine for a low center-of-gravity.
Dual 100kg servos with heavy duty, adjustable aluminum servo saver. Heavy duty steel heim joint steering-link ends.
Tires and Rims
12 x 7.5 inch monster truck chevron-treaded tires with foam insert. Inner and outer heavy duty nylon beadlocks. Mounted on 24mm hex, 5.5 x 6 inch nylon rims with strengthening ribs.
Front and rear axle-mounted manual disc brakes with steel rotors. Equipped with strong 70kg brake servos for great stopping power.
FlySky 2.4 GHz 6-channel transmitter. Ready for lights, rear steering and other accessories. Remote engine kill switch. Upgraded aluminum enclosed battery receiver and kill switch box with volt meter.
Five all-metal gear servos installed:
- 2x 100kg steering servos
- 1x 70kg brake servo
- 1x 20kg throttle servo
- 1x 20kg Reverse Servo
New Version 3 Edition
With the latest version of the Raminator Monster Truck, we’ve introduced upgrades to the platform based on customer feedback. Upgraded 100KG steering servos, upgraded large capacity MEGA shocks, upgraded aluminum electronics box with voltage meter, and an upgraded and redesigned reverse gear slider are just some of the upgrades we’ve added to this model. Tap the button below to take a look at the full listing.Order Now
|20 to 30 MPH
|49cc 2-Stroke Reed-valve Engine
|Single Speed with Remote Reverse Feature
|Front and Rear Bevel Gear Differential
|Front & Rear Single Disc Mounted Driveshaft Mounted Manual Disc Brakes
|All Steel Gears with double chain transfer case drive
|Steering Dual Servo with HD Aluminum Servo Saver
|2.4 GHz 6-Channel FlySky Digital Radio
|12 x 7.5 inches
|5.5 in diameter x 6 inches wide
|Minimum Ground Clearance
|4 inches, Adjustable
|Minimum Chassis Clearance
|4.5 inches, Adjustable
|Minimum Axle Ground Clearance
|7.2v 4800 mAh NiMH Battery