Description
Primal RC Raminator V3 Monster Truck Electronic Brush-less Motor Conversion Kit by Chris Fine of FINE DESIGNS
MPN: FINEDESIGN-03
MPN: FINEDESIGN-03
Note: Because this product contains a LiPo battery, we must ship the small LiPo battery that powers the cooling fan separately from the rest of the kit for any air shipping (Next Day Air, Second Day Air, etc.)
Features Include:
- Special FINE DESIGNS Billet Motor Mount
- Custom Tuned Brush-less Black Jacket 500KV (V2) Water Cooled Motor
- Special Clutch Mount and Clutch Installed
- Dynamite 160A-HV Water Cooled Electronic Speed Control with EC5 Battery Connectors
- Aluminum Water Storage Tank
- Water Pump with Billet Mount
- Radiator with large 3.25 inch cooling fan powered by a included 2200mah 11.1v LIPO Battery
- Aluminum Battery Mounting Plate with Hook and loop Hold Down Straps
- Color Picture Instruction Sheet
- All Wiring, and hardware needed to install is included (some bolts are re-used from the truck)
Requires:
Batteries and Charger of you choice
Stock transmission gear ratio to be installed (if changed from stock)
Motor Battery Information:
Two 4S LIPO Batteries 5000MAH or higher are recommended (in series for 8S) Fast and powerful on 8S, about 30mph with tons of torque.
ONLY RUN 10S or 12S if you upgrade the ESC !!!
Any Battery being used should be 60C or higher
Check out the installation video here https://www.youtube.com/watch?v=9HpnTbYiZm0
